Timken MUOA 1 15/16 Ball Insert Bearings

The material of a ball:440C Stainless Steel; RoHS:6; Inner/Outer Ring Material:440C Stainless Steel; Shield Shape:Double Sealed; Load Direction:Radial Load; Precision:Grade 0; D:85; Type:Ball; Precision:Grade 0; Size Standards:Metric System;

L:185 mm; B1:71.3 mm; B:55.4 mm; Designation of housing:FC211-; d:55.56 mm; e:13 mm; T max.:200 °C; Weight:4.16 kg; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C;

Load Direction:Radial; Days to Ship:8 Days; Outer Ring Shape:Flat; Precision:Grade 0; Retainer Type:Punching; Inner/Outer Ring Material:Stainless Steel; Volume Discount:Available; Rolling Element Material:Stainless Steel; Rolling Element Material:Stainless Steel; Retainer Type:Punching;

Cam Follower Type:Standard; Roller Type:Crowned Type; Basic Load Rating Cor (Static)(kN):6.78; Tightening Method:Hex Socket on Head; Days to Ship:6 Days; Roller Type:Crowned Type; D:26; Volume Discount:Available; Category:Cam Followers; RoHS:6;

Holder Surface Treatment:Clear Anodize; Volume Discount:Available; Bearing Retained:Yes (with retaining; Volume Discount:Available; Housing Material:[Aluminum Alloy] 201; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):20; Bearing Part Number:6904; Shape:Flanged Pilot Type; Number of Bearings:

Rolling Element Material:Bearing Steel; Machining:No; Basic Load Rating, Dynamic Rating(N):96100; Grease Type:SH44M; Basic Load Rating, Static Rating(N):71500; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; d:90; Diameter series symbol:Used for Light lo

Ew:49 mm; b:24.8 mm; Mass:0.11 kg; Characteristic rolling element frequency, BSF:5.83 Hz; Fw:35 mm; Bc:24.8 mm; Lw:20 mm; Characteristic cage frequency, FTF:0.42 Hz; Cr:53.5 kN; Min operating temperature, Tmin:-20 °C;

B1:48.4 mm; d1:74.5 mm; Z:104.5 mm; T max.:200 °C; d:55 mm; s1:36.95 mm; T min.:-20 °C; Designation of housing:PAE211N-; N:M16; Weight:2.91 kg;

Symbol of Bearing Ring Shape:No symbol: Internal; Raceway Ring Shape:Cylindrical Roller; Combination of two pieces:Standard; Holder Symbol:G1 (high tensile bra; Outer ring oil hole:M (with fitting nozz; Rolling Element Material:Steel; Shaft Bore Config.:Cylindrical Bore; Cylinder shape (suffix symbo

A1:54 mm; N1:38 mm; B1:79.4 mm; Designation of bearing:EX312G2; d:60 mm; T min.:-20 °C; B:61.9 mm; L1:95 mm; Weight:9.79 kg; N:25mm;

Surface Treatment:No; Surface Treatment:No; Heat Resistant Characteristics:Standard; Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; d:55; Pillow Type, Category:Standard; Specifications:Washer whose cutout; Days to Ship:Quote; Rolling Element Material:Steel;

T(mm):40 ～ 60; Number of Bearings:Double; RoHS:6; Shape:Bottom Mount; Days to Ship:8 Days; Type:Bearings with Housin; Number of Bearings:Double; Thickness, Height Indication:T, h Selection; Bearing I.D. d(mm):25; Bearing Part Number:6005;

Designation of closed end cover:SCC208; B:49.2 mm; J1:71 mm; s1:24.6 mm; T min.:-20 °C; Dz:88 mm; G:M6x1; J:144 mm; A:36 mm; d:38.1 mm;

Characteristic rolling element frequency, BSF:10.91 Hz; Brand:NTN; G:M20X1.5; n:8 mm; Precision class:P0; e:37 mm; B3:9 mm; B:25.5 mm; Characteristic cage frequency, FTF:0.46 Hz; Cr:20.7 kN;

Designation of bearing:US204-12G2; Designation of open end cover:SCOU204-12; T min.:-20 °C; H1:11 mm; d:19.05 mm; Z:45.6 mm; C:12.8 kN; Designation of housing:PA204N-; N:M10; A:40 mm;