Timken 22238KEMBW33W40IC4 Spherical Roller Bearings

Designation of bearing:US209-26G2T04; A:36.5 mm; C:31.85 kN; T max.:100 °C; A4:32.5 mm; T min.:-40 °C; Weight:1.95 kg; L:111 mm; Designation of housing:FLZ209-; S:10.2 mm;

C0r:22.8 kN; Characteristic rolling element frequency, BSF:11.92 Hz; G:M18X1.5; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C; D:40 mm; B2:36.5 mm; B:21.5 mm; Precision class:P0; Min operating temperature, Tmin:-20 °C;

Designation of bearing:UC202G2L4; L:60 mm; Weight:0.53 kg; G:M6x1; A:25.5 mm; C:12.8 kN; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; Dz:54 mm; T min.:-20 °C;

Dw1:3.5 mm; D2:29 mm; Min operating temperature, Tmin:-20 °C; rs min:0.3 mm; Weight / Kilogram:0.053; a:23.7 mm; C2:6.5 mm; Product Group:B04144; D:24 mm; Category:Roller Bearings;

N:17mm; H1:18 mm; N1:21 mm; Designation of housing:PH206N-; A:50 mm; Z:19 mm; B:30 mm; T min.:-20 °C; T max.:200 °C; G:M6x1;

Self Aligning:Self Centering; Bearing Inner Ring Material:Steel; Expansion Type:Non-Expansion; Ball Bearing Housing Series:211 Series; Bearing Insert Material:Steel; End Cap Groove:Yes; Retainer Material:Nylon; Bearing Outer Ring Material:Steel; Brand:Baldor-Dodge; Housing Type:2 Bolt Pillow Block;

A2:28 mm; A5:14.8 mm; L:113 mm; s1:27.8 mm; A1:12 mm; d:30 mm; L1:70 mm; T min.:-20 °C; H2:56 mm; N2:37 mm;

Max operating temperature, Tmax:120 °C; d:70 mm; Nlim (oil):5,900 rpm; rs min:1.5 mm; ra max:1.5 mm; Min operating temperature, Tmin:-40 °C; B:24 mm; Static load, C0:137 kN; Characteristic rolling element frequency, BSF:6.41 Hz; da min:78 mm;

d:17 mm; Designation of housing:FLE203N-; T min.:-20 °C; Dz:46 mm; s1:11 mm; Z:37.6 mm; N:11,5mm; C0:4.78 kN; Designation of open end cover:SCO203-17; A2:33 mm;

Retainer Material:Polymer; Grease Type:Mobilith SHC PM 220; Base to Center Height:Not Applicable; Bearing Series:206 Series; Housing Coating:Powder Coat; Flinger Type:Rubberized; Retainer Type:Max Life Cage; Ball Bearing Housing Series:206 Series; Ring Size:Next Smaller Ring Si; Housing Material:Cas

C:171.6 kN; N:38mm; A2:117.6 mm; Designation of housing:FS320-; T min.:-40 °C; H3:260; T max.:100 °C; Recommended tightening torque for set screw:65.2 Nm; e:39 mm; d:101.6 mm;

H:54 mm; L1:60 mm; C0:20.8 kN; T min.:-20 °C; Designation of housing:P209N-; d:41.28 mm; C:31.85 kN; Weight:2.38 kg; J:146 mm; s1:24.6 mm;

S:25.4 mm; d:57.15 mm; A2:70.7 mm; e:31 mm; T max.:100 °C; Designation of housing:FLE212N-; J:202 mm; C:52.5 kN; A1:16 mm; Designation of closed end cover:SCC212;

H:78 mm; S:12.7 mm; L1:225 mm; SW:3.18 mm; s1:15.5 mm; Designation of housing:SP203-205/47-; Recommended tightening torque for set screw:3.7 Nm; C0:6.65 kN; G:R1/8"; T max.:100 °C;

G:M6x1; Z:34 mm; L1:94 mm; A2:54.6 mm; C0:23.2 kN; J1:76 mm; Designation of housing:FA210N-; J:157 mm; e:22 mm; s1:25.8 mm;