Angular Contact Bearings

Contact Now


Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.



Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.



Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.




NTN 6205z Bearing

Standard Steel
Cylindrical Roller No

80 mm x 140 mm x 26 mm Timken 7216WN Angular Contact Bearings

0,4 mm 0,0059 Kg
0,09 kN 6001/HR22T2

2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 0.827 Inch | 21 Millimeter Timken 7211WN MBR SU Angular Contact Bearings

Imperial 1000 rpm
4.9 in 99000 lb

1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter Timken 7209WN MBR SU Angular Contact Bearings

4,763 mm 0,442 kN
6,35 SFR188-2Z

Timken 5315KG Angular Contact Bearings

22244W33 400 mm
220 mm 108 mm

80 mm x 140 mm x 44,45 mm Timken 5216 Angular Contact Bearings

207000 lbf 800000 lbf
20.1 mm 0.308

Timken 7210WN-DU DUPLEX PAIR Angular Contact Bearings

LSM230BX 17 in
0.1 in 262577 lbf

110 mm x 200 mm x 38 mm Timken 7222WN MBR Angular Contact Bearings

799A/792 1,8 mm
34,925 mm 110 mm x 200 mm x 38 mm