Angular Contact Bearings

Contact Now

 

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

 

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.

 

 

Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

 

 

 

55 mm x 100 mm x 33,32 mm Timken 5211KG Angular Contact Bearings

FAG VKBA 3442
5839 ALFA / 145 / engine

60 mm x 110 mm x 36,53 mm Timken 5212KG Angular Contact Bearings

0,17 kN 8
8 mm 15

2.756 Inch | 70 Millimeter x 4.921 Inch | 125 Millimeter x 1.563 Inch | 39.7 Millimeter Timken 5214WDBR Angular Contact Bearings

SC0390 52,000
2.756 Inch | 70 Millimeter x 4.921 Inch | 125 Millimeter x 1.563 Inch | 39.7 Millimeter 12,000

75 mm x 160 mm x 37 mm Timken 7315WN Angular Contact Bearings

80 N/mm2 80 N/mm²
3 ° 1180

25 mm x 80 mm x 21 mm Timken 7405W Angular Contact Bearings

0.202 Kg 16
25 mm x 80 mm x 21 mm 30 mm
2/11